CPI SAT Prodelin 3.8m X Band 1385 Series Satellite Dish

Description

CPI SAT Prodelin 3.8m X Band 1385 Series Satellite Dish
The CPI SAT Prodelin 3.8m X Band 1385 Series Satellite Dish is a high-performance precision molded, four-piece, offset reflector design typically used in military VSAT (Tx/Rx) networks. The CPI SAT Prodelin 3.8m X Band 1385 Series Satellite Dish is made from a durable SMC and hot-dip galvanised steel construction providing an antenna solution that can endure even the most challenging of environmental conditions.

The CPI SAT Prodelin 3.8m 1385 Series Satellite Dish is type approved for use in the Ku Band, C Bands and X Bands and rated to transmit and receive satellite signal in both linear and circular polarisations. The CPI SAT Prodelin 3.8m C Band 1385 Series Satellite Dish is a durable four piece antenna system that utilises a azimuth over elevation mount with an elevation adjustment of 12° to 90° and an azimuth adjustment of a full 360° (35° of fine adjustment).

CPI SAT 1385 Mounting Options:
The CPI SAT Prodelin 3.8m X Band 1385 Series Satellite Dish has three mounting options available. The first is a simple in ground mount which is a length of pipe 273mm OD in diameter concreted in the ground with a plinth poured around the top edge. This type of mount is best suited to installations at ground level where no existing concrete footings have been poured.
The second type of mount available for the 1385 series 3.8m dish is a pedestal type mount, and is manufactured locally to CPI SAT specifications. This type of mount consists of a piece of pipe 273mm OD in diameter welded to a base plate with gussets added for extra stability and strength. This mount is best suited to building roof tops or locations where an existing concrete mounting pad exists.

The third mounting option available for the 1385 series dish is a non-penetrating mount (NPM). An NPM mount is ballasted in position allowing the dish to be installed without the need for permanent fixings. The required amount of ballast can be calculated for different geographically wind rated areas in Australia. This is great for temporary installations.
We also offer a custom mount service where our local engineer will design a mount to suit a specific building or roof design.

Additionally, we can also provide engineering services in the format of site specific Structural Design Certificate which is commonly required by councils and building management groups prior to installation.

DISCLAIMER: This product is subject to CPI’s VSAT Minimum Order Quantity, which may affect lead times.

About CPI SAT
Av-Comm is the authorised distributor for CPI SAT products in Australia, New Zealand, and the Pacific Islands. Av-Comm carries a range of CPI SAT products and spare parts at our Sydney (Australia) warehouse and can facilitate rapid dispatch to your location. CPI SAT products have been previous sold under the brands, GD Satcom, Satcom Technologies, Prodelin, and Vertex.