Your cart is currently empty!
AVCOM PSA-4200C 4.2GHz Spectrum Analyser for Field Use
AVCOM PSA-4200C 4.2GHz Spectrum Analyser for Field Use can be monitored and controlled both locally from the front panel and remotely using the Avcom Remote Control Software via serial port or Ethernet.
Description
Description
AVCOM PSA-4200C 4.2GHz Spectrum Analyser for Field Use can be monitored and controlled both locally from the front panel and remotely using the Avcom Remote Control Software via serial port or Ethernet. The Remote-Control Software has an intuitive user interface that is easy to use with no special training required. It allows remote monitoring and control from your network or over the internet.
Features include screenshot capture recording, SNMP for alarm/monitoring, markers, cross-polling and Automated Data Acquisition (DAQ) with tolerance comparison and integrated email alerts, to name a few. Up to twelve windows can be displayed at one time. The GUI is capable of saving and recalling an unlimited number of screenshots and integrates with the PSA to upload or download saved waveforms from the analyser’s internal user memory locations. The Remote-Control Software is available for Windows.
The colour LCD display provides the user with an accurate and detailed picture of the spectrum being investigated, even when operating under challenging bright sunlight or other difficult lighting conditions. The field replaceable Li-Ion battery uses an internal charger and a multi segment battery status indicator is provided. The PSA-4200C comes equipped with 13V/18V/22kHz LNB power to directly power the satellite LNB, and programmable LO Offset selection provides no-math direct frequency readouts of low side or high side LNB’s.
Up to ten user-defined presets allow for executing quick repetitive testing parameters. Screenshots may be saved on the PSA-4200C and can be recalled on-screen for comparing signal footprints or can be downloaded to a PC using AVCOM’s free software for documentation.
- Designed for Satellite, TV and Radio Broadcasting, CATV, Wireless, TCSM, and GPS
- L.O. Frequency Offsets Displays Direct Frequency Readout
- 10 Customizable Presets/50 User Memory Locations
- Fast Refresh Rates up to 13/sec
- 13/18Vdc/22kHz LNA/LNB power
- Easy-to-use front panel interface, even when wearing bulky gloves
- Full Remote Control Monitoring via Ethernet/RS-232 Using Free Remote Control Software (GUI)
- Options Include Carrying Case, Extended Amplitude Range Solutions, Down Converters for Extended Frequency Coverage, and LNB Power
Key Features
| Parameter | Value |
| Frequency Range | 5 – 2300MHz Input 1: 5 – 2300MHz, Input 2: 3.8 – 4.2GHz |
| Span Width | Up to 1300 MHz (Dependent on Center Frequency) |
| Resolution Bandwidth | 10KHz, 100KHz, 300KHz, 1MHz |
| RF Sensitivity | Greater than -85 dBm Typical |
| Reference Levels | Selectable -10 dBm, -30 dBm, & -50dBm
(front panel) (5dBm increments in GUI) |
| Scale | 5 dB/Div & 2 dB/Div |
| Dynamic Range | 40 dBm on Application Window (50dBm GUI window) |
| Amplitude Accuracy | ± 1 dB typical |
| Frequency Accuracy | +/- 1KHz typical |
| Max RF Input | 25 VDC MAX (DC Blocked), +30dBm (1W) |
| Input Impedance | 50 Ω |
| Amplitude Range | 0 dBm to -85 dBm (standard) 0 dBm to -105 dBm (preamp option) +10 dBm to -65 dBm (attenuator option) *Preamp and attenuator option available on Input 1 only |
| Input Connector | Input 1: BNC standard. F, SMA, TNC, and N available. Input 2: N-type only |
| LNB Power | 13-18V, 22kHz available on Input 1 only (optional) |
| Operating Temperature Range | -10°C to +60°C |
| Battery Run Time | 1 hour typical |
| Power | 15V@3A max |
| Display | 5.7” TFT-LCD, 640×480 (VGA), 16-Bit RGB |
Additional information
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 23 × 24 × 15 cm |
| SKU | AVPSA-4200C |
Let us do your dishes for you
Let our team of field-engineers and technicians find innovative and smart solutions to your communications challenges.
