ETL SRY-G2S-TxxS6-321

Name: ETL SRY-G2S-TxxS6-321 - Av-Comm Space & Defence
Brand: ETL System
SKU: ETLSRYG1STS6173-1

Description

ETL The StingRay CWDM Genus 1U Series of L-band RF over fibre units are designed to provide compact fibre links, with eight wavelengths (up to 16 wavelengths contact ETL) on a single fibre cable, with an optical budget of 12 dB. The transmit modules benefit from a high and wide dynamic range with automatic link optimisation ensuring high quality L-band transmission.

The StingRay CWDM system comprises of transmit modules and a multiplexer module to combine up to 8 wavelengths on to a single fibre cable at the transmit end. A demultiplexer module and receive modules are then used at the receive end to split the separate wavelengths.

Up to 8 channels on a single fibre
AGC, MGC and Fixed Gain modes
13/18 V and 22 kHz tone LNB control
Hot swap
50 and 75 ohm
Superior RF specifications and Isolation
Option for 1+1 redundancy
Option for RF monitor port
Secure protocols with SNMPv3 and HTTPS
Local & Remote control & monitoring via RJ45 Ethernet port and web browser interface
3-year warranty as standard

Key Features

Parameter	Value
Frequency Range	500-3150 MHz
Flatness (dB)	850 – 2150MHz: ±1.5 dB, Fixed gain mode 500 to 3150 MHz: ±2.0 dB, Fixed gain mode Any 36MHz: ±0.25 dB, Fixed gain mode
Return Loss (db)	50 ohm SMA 18 dB typ., 14 dB min 50 ohm BNC 18 dB typ., 14 dB min 75ohm BNC 14 dB typ., 10 dB min 75 ohm F-type 14 dB typ., 10 dB min
Gain Setting Modes	Manual Gain Control (MGC), Automatic Gain Control (AGC), Fixed Gain (FG)
Manual Gain Range	60 dB (in 0.5 dB steps)
Group Delay Variation	2ns over full band. 1ns over any 36MHz
RF Signal Range	Input: -70 to -10 dBm (total power) Operational i/p range Output: -70 to -10 dBm (total power) o/p range available under all i/p conditions.
Max RF Input	+16 dBm total power. Damage level, NOT operational
10MHz Level at Output	-10 to +10 dBm. User settable level via the chassis. Accuracy ±2 dB
10MHz Isolation	-40 dB, between adjacent modules in same chassis
Laser Type	DFB. Optical isolator for improved performance
Optical Wavelength	1470 to 1610 nm
Optical Power	Output: 4.5 ±2.5 dBm. 3.8 dBm typical
Optical Connectors	FC/APC , SC/APC Single mode fibre. Use angle polish connectors only
Power Consumption	15W Typical. With 18V 500 mA LNB Power
LNB Power	18/13V ±5 %, 500 mA max
Module Swap	Hot swap
MTBF	>200,000 hours