ETL SRY-G2S-TS6-311

Name: ETL SRY-G2S-TS6-311 - Av-Comm Space & Defence
Brand: ETL System
SKU: ETLSRYG2STS6311

ETL StingRay S-band Transmit and Receive RF Over Fibre modules to fit Genus 2U chassis. The transmit module can provide LNB power 13/18VDC, 22kHz tone up to 500 mA.

Request a Formal Quotation

Description

ETL StingRay S-band Transmit and Receive RF Over Fibre modules to fit Genus 2U chassis. The transmit module can provide LNB power 13/18VDC, 22kHz tone up to 500 mA. When fitted with a 10 MHz distributing module the TX module can inject an external or internal 10 MHz tone onto the S-band feed.

AGC, MGC and Fixed Gain modes
13/18 V and 22 kHz tone LNB control
Hot swap
50 and 75 ohm
Superior RF specifications and Isolation
Redundancy options from 1+1 up to 4+2 redundancy
Options for dual modules or RF monitor ports
Secure protocols with SNMPv3 and HTTPS
Local & Remote control & monitoring via RJ45 Ethernet port and web browser interface
3-year warranty as standard

Key Features

Parameter	Value
Frequency Range	500-3150 MHz
Flatness (dB)	850 – 2150MHz: ±1.5 dB, Fixed gain mode 2150 – 2450MHz: ±2.0 dB, Fixed gain mode Any 36MHz: ±0.25 dB, Fixed gain mode
Return Loss (db)	50 ohm SMA: 18 dB typ., 14 dB min 50 ohm BNC: 18 dB typ., 14 dB min 75ohm BNC: 14 dB typ., 10 dB min (8 dB min >2450 MHz) 75 ohm F-type: 14 dB typ., 10 dB min (8 dB min >2450 MHz)
Gain Setting Modes	Manual Gain Control (MGC), Automatic Gain Control (AGC), Fixed Gain (FG)
Manual Gain Range	60 dB (in 0.5 dB steps)
Group Delay Variation	<2ns over full band. <0.5ns over any 36MHz
RF Signal Range	Input: -70 to -10 dBm (total power) Operational i/p range Output: -70 to -10 dBm (total power) o/p range available under all i/p conditions
Max RF Input	+16 dBm total power. Damage level, NOT operational
10MHz Level at Output	-10 to +10 dBm. User settable level via the chassis. Accuracy ±2 dB
10MHz Isolation	-40 dB, between adjacent modules in same chassis
Laser Type	DFB. Optical isolator for improved performance
Optical Wavelength	1310 ± 10 nm
Optical Power	Output: 4.5 ±2.5 dBm. 3.8 dBm typical
Optical Connectors	FC/APC , SC/APC Single mode fibre. Use angle polish connectors only
Power Consumption	15W Typical. With 18V 500 mA LNB Power
LNB Power	18/13V ±5 %, 500 mA max
Module Swap	Hot swap
MTBF	>200,000 hours