ETL L-Band SRY-G1S-RS2-180

Name: ETL L-Band SRY-G1S-RS2-180 - Av-Comm Space & Defence
Brand: ETL System
SKU: ETLSRYG1SRS2180

ETL StingRay L-band Transmit and Receive RF Over Fibre modules to fit Genus 1U chassis or ODU. The transmit module can provide LNB power 13/18VDC, 22kHz tone up to 500 mA.

Request a Formal Quotation

Description

ETL StingRay L-band Transmit and Receive RF Over Fibre modules to fit Genus 1U chassis or ODU. The transmit module can provide LNB power 13/18VDC, 22kHz tone up to 500 mA. When fitted with a 10 MHz distributing module the TX/RX module can inject an external or internal 10 MHz tone onto the L-band feed.

AGC, MGC and Fixed Gain modes
13/18 V and 22 kHz tone LNB control
Options for dual modules or RF monitor ports
50 and 75 ohm
Hot Swap
Superior RF specifications and Isolation
Redundancy options from 1+1 up to 4+2 redundancy
Secure protocols with SNMPv3 and HTTPS
Local & Remote control & monitoring via RJ45 Ethernet port and web browser interface
3-year warranty as standard

Key Features

Parameter	Value
Frequency Range	850-2450 MHz
Flatness (dB)	850 – 2150MHz: ±1.5 dB, Fixed gain mode 2150 – 2450MHz: ±2.0 dB, Fixed gain mode Any 36MHz: ±0.25 dB, Fixed gain mode
Return Loss (db)	50 ohm SMA 18 dB typ., 14 dB min 50 ohm BNC 18 dB typ., 14 dB min 75ohm BNC 16 dB typ., 12 dB min 75 ohm F-type 16 dB typ., 12 dB min
Gain Setting Modes	Manual Gain Control (MGC), Automatic Gain Control (AGC), Fixed Gain (FG)
Manual Gain Range	60 dB (in 0.5 dB steps) The MGC gain mode allows link optimisation for better Noise or Distortion performance
Group Delay Variation	<2ns over full band. <0.5ns over any 36MHz
RF Signal Range	Input: -70 to -10 dBm (total power) Operational i/p range Output: -70 to -10 dBm (total power) o/p range available under all i/p conditions.
Max RF Input	+16 dBm total power. Damage level, NOT operational
10MHz Level at Output	-10 to +10 dBm. User settable level via the chassis. Accuracy ±2 dB
10MHz Isolation	-40 dB, between adjacent modules in same chassis
Laser Type	DFB. Optical isolator for improved performance
Optical Wavelength	1100 to 1650nm. Optimised for 1310nm and 1550 nm
Optical Power	Input: 0 to 4.5 dBmo. Max +10 dBm
Optical Connectors	FC/APC , SC/APC Single mode fibre. Use angle polish connectors only
Power Consumption	4 W Typical
LNB Power	18/13V ±5 %, 500 mA max
Module Swap	Hot swap
MTBF	>200,000 hours